A laboratory syringe pump is passed into the electrolyte in the battery cathode and anode chamber at

2023-05-04 14:13:27

An experiment studies the performance of photocatalytic fuel cells in degrading wastewater under light conditions while producing electricity. The battery is a continuous liquid feed, and the performance of the photocatalytic fuel cell is tested under the condition of controlling the constant flow rate of the electrolyte and different flow rates, and the influence of the electrolyte flow rate on the power production performance of the battery and the performance of degrading wastewater are obtained.gq2Rongbai Pump

In the research process, a dual-channel perfusion pumping laboratory syringe pump was used to inject electrolyte into the cathode and anode chambers of the photocatalytic fuel cell at the same specific flow rate, so as to obtain the influence of electrolyte flow rate on the performance of photocatalytic fuel cell and determine a better flow rate value, so that the battery performance can achieve better.gq2Rongbai Pump

The electrolyte plays the role of conduction electrons between the positive and negative electrodes in the battery, and the experiments show that its flow rate should not be too high or too low, and the microsyringe pump as the power source of the whole system provides a stable electrolyte flow rate, which is the guarantee of high performance of photocatalytic wastewater fuel cells.gq2Rongbai Pump

gq2Rongbai Pump
 

Related Products >

  • Micro Piston Pump

    High Precision, Long Life.It can meet the strict requirement of In Vitro Diagnostic medical devices and analytical instruments for micro fluid transfer.Max. Num

    More
    Micro Piston Pump
  • CSP60-2A

    No detailed parameters are available at this time. If you have any needs, please contact our customer service or sales staff. Thank you for your understanding

    More
    CSP60-2A
  • SP30-1A Industrial Syringe P

    Main Spec
    Accuracy:≤1.0 % (syringe ≥1 mL)Precision:CV≤0.05% at full stroke (with syringe ≥ 500uL)Wetted material:Borosilicate glass,PTFE,PFA,CTFE,ETFE,UHMW

    More
    SP30-1A Industrial Syringe P
  • SP60-1A Industrial Syringe P

    Main Spec
    Accuracy:≤1.0 % (syringe ≥1 mL)Precision:CV≤0.05% at full stroke (with syringe ≥ 500uL)Wetted material:Borosilicate glass,PTFE,PFA,CTFE,ETFE,UHMW

    More
    SP60-1A Industrial Syringe P