Mask bacteria filtration detection equipment has a built-in peristaltic pump for transferring bacter

2023-04-27 16:34:55

Microbial indicators (such as Staphylococcus aureus suspension) are pumped to the spray port of the aerosol generator by a peristaltic pump, and the air source is also delivered to the spray port of the aerosol generator, so that the microbial suspension is atomized in the aerosol generator to produce bacterial aerosols. Bacteria are sampled through a biological sampler followed by culture. Finally, the filtration efficiency of the mask is calculated according to the bacterial aerosol concentration before and after the mask filtration.SULRongbai Pump

SULRongbai Pump

Mask bacteria filtration detectionSULRongbai Pump

Mask bacteria filtration detection equipment has a built-in peristaltic pump for transferring bacterial suspension to the aerosol chamber. The suspension meets the high-pressure gas at the spray port of the aerosol chamber to produce an aerosol. By comparing the concentration of bacterial aerosols before and after filtration, it was used to detect whether the bacterial filtration efficiency of the mask met the relevant standards.SULRongbai Pump

During the transfer of the bacterial suspension, the activity of the bacteria is not destroyedSULRongbai Pump

Peristaltic pump flow adjustable, flow range: 0.006~3.0 (ml/min)SULRongbai Pump

Flow accuracy: above ±2.5%SULRongbai Pump

Recommended model: BT100-2JSULRongbai Pump

Related Products >

  • Micro Piston Pump

    High Precision, Long Life.It can meet the strict requirement of In Vitro Diagnostic medical devices and analytical instruments for micro fluid transfer.Max. Num

    More
    Micro Piston Pump
  • CSP60-2A

    No detailed parameters are available at this time. If you have any needs, please contact our customer service or sales staff. Thank you for your understanding

    More
    CSP60-2A
  • SP30-1A Industrial Syringe P

    Main Spec
    Accuracy:≤1.0 % (syringe ≥1 mL)Precision:CV≤0.05% at full stroke (with syringe ≥ 500uL)Wetted material:Borosilicate glass,PTFE,PFA,CTFE,ETFE,UHMW

    More
    SP30-1A Industrial Syringe P
  • SP60-1A Industrial Syringe P

    Main Spec
    Accuracy:≤1.0 % (syringe ≥1 mL)Precision:CV≤0.05% at full stroke (with syringe ≥ 500uL)Wetted material:Borosilicate glass,PTFE,PFA,CTFE,ETFE,UHMW

    More
    SP60-1A Industrial Syringe P